Updating B9S

Updating B9S

Required Reading

This page is for existing boot9strap users to update their installation of boot9strap to the latest version.

To extract the .7z files linked on this page, you will need a file archiver like 7-Zip or The Unarchiver.

There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:

1.Go to System Settings, then “Internet Settings”, then “SpotPass”, then “Sending of System Information”
2.Disable the “Sending of System Information” option
3.Exit the System Settings
4.Go to your Friend List (the orange Face Icon in the top row of your Home Menu)

• If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)

5.Go to the Friend List settings, then “Friend Notification Settings”, then “Show friends what you’re playing”
6.Disable the “Show friends what you’re playing” option
7.Exit your Friend List

What You Need

The latest release of SafeB9SInstaller
The latest release of boot9strap (standard boot9strap; not the devkit file, not the ntr file)
The latest release of GodMode9
The latest release of Luma3DS (the .7z file)

Instructions

Section I - Prep Work

For all steps in this section, overwrite any existing files on your SD card.

1. Insert your SD card into your computer
2. Create a folder named boot9strap on the root of your SD card
3. Copy boot9strap.firm and boot9strap.firm.sha from the boot9strap .zip to the /boot9strap/ folder on your SD card
4. Copy SafeB9SInstaller.firm from the SafeB9SInstaller .zip to the /luma/payloads/ folder on your SD card
5. Copy GodMode9.firm from the GodMode9 .zip to the /luma/payloads/ folder on your SD card
6. Copy the gm9 folder from the GodMode9 .zip to the root of your SD card
7. Reinsert your SD card into your device

Section II - Installing boot9strap

1. Launch Luma3DS chainloader menu by holding (Start) during boot
2. Launch SafeB9SInstaller by pressing (A)
3. Wait for all safety checks to complete
4. When prompted, input the key combo given to install boot9strap
5. Once it has completed, hold (Start) while pressing (A) to reboot your device to the Luma3DS chainloader

• If you encounter an argc = 0 error booting your device after the B9S update, just continue to fix it

Section III - Update Luma3DS

1. Power off your device
2. Insert your SD card into your computer
3. Copy boot.firm from the Luma3DS .7z to the root of your SD card, replacing the existing file
4. Reinsert your SD card into your device
5. Power on your device

Section IV - Configuring Luma3DS

This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.

1.In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:

• “Show NAND or user string in System Settings”

2.Press (Start) to save and reboot

Section VI - CTRNAND Luma3DS

1. Power off your device
2. Launch GodMode9 by holding (Start) during boot
3. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
4. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
5. Press (Home) to bring up the action menu
6. Select “Scripts…”
7. Select “GM9Megascript”
8. Select “Scripts from Plailect’s Guide”
9. Select “Setup Luma3DS to CTRNAND”
10. When prompted, press (A) to proceed
11. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
12. Press (A) to continue

Section VII - Cleanup SD Card

1. Select “Cleanup SD Card”
2. When prompted, press (A) to proceed
3. Press (A) to continue
4. Press (B) to return to the main menu
5. Select “Exit”
6. Press (A) to relock write permissions if prompted
7. Press (Start) to reboot your device

Boot9strap has been successfully updated.