Updating Firmware (3.60)
Required Reading
The HENkaku exploit is only compatible with the firmware version 3.60. As a result, lower firmware versions must update using a custom update server in order to use that exploit.
Note that a custom update server can only update your device, not downgrade it. If you are on a firmware version higher than 3.60, you should return to the index
What you need
- An internet connection on your PS Vita (TV)
Instructions
Section I: Prep Work
1.Launch the Settings application2.Navigate to Network -> Wi-Fi Settings
- Connect to a Wi-Fi network if you have not already done so
- This is signified by a green dot next to the network
5.Set “DNS Settings” to “Manual”
6.Set “Primary DNS” to 212.47.229.76
7.Leave “Secondary DNS” blank
8.Ensure “Proxy Server” is set to “Do Not Use”
9.Return to the main Settings menu
Section II: Updating to 3.60
1.Navigate to System Update -> Update Using Wi-Fi2.Ensure the update message “3.60 (変革 Compatible)” is displayed
- If it displays any other message, stop and figure out what went wrong
- When the process has completed, your device will reboot automatically
0 Comments